-3%
Voco Admira Fusion Flow 2x2g Syringe #A1
₹4,950.00
- Description
- Size Guide
- Reviews (0)
Description
Admira Fusion Flow is a flowable, light-curing, radiopaque nanohybrid ORMOCER restorative material.
The worldwide first purely ceramic-based flowable restorative material
- pure Silicate Technology, i.e. fillers and resin matrix based purely on silicon oxide
- contains no classic monomers
Thanks to the most innovative ORMOCER technology
- extremely low polymerisation shrinkage (2.75 % by volume) and particularly low level of shrinkage stress in comparison to conventional flowable restorative composites
- inert, so excellent biocompatible and extremely resistant to discolouration
“Flow on demand” – the material becomes flowable only when under pressure or in motion. When the application has been completed, it is stable enough not to flow out of the cavity.
Excellent surface affinity with complete wetting of the cavity walls
- VOCO’s patented, non-running and non-dripping NDT-syringe ensures reliable and perfectly precise application. Undesirable loss of material is thus a thing of the past.
- Excellent handling, simple high-lustre polishing procedure coupled with high surface hardness guarantee first-class long-term results
- Compatible with all conventional bonding agents
INDICATIONS:
- Filling of small cavities and extended fissure sealing
- Blocking out undercuts
- Lining or coating cavities
- Fillings of class III – V cavities
- Repairing fillings, veneers and temporary restorations
- Luting translucent prosthetic pieces
- Locking, splinting of loose teeth
Features
- Pure Silicate Technology, i.e. fillers and resin matrix based purely on silicon oxide.
- Contains no classic monomers.
- Extremely low polymerisation shrinkage (2.75 % by volume) and particularly low level of shrinkage stress in comparison to conventional flowable restorative composites.
- Excellent surface affinity with complete wetting of the cavity walls.
-
Excellent handling, simple high-lustre polishing procedure coupled with high surface hardness guarantee first-class long-term results.
-
Compatible with all conventional bonding agents.
Key Specifications
- Store at temperatures of 4 °C to 23 °C. To avoid exposure to light and
potentially resulting polymerisation, syringes should be closed immediately after dispensing.
Packaging
- 2 x 2g Syringe
Direction to Use
STEP 1
- Lock the enclosed application tip on the syringe with a clockwise turn and directly apply Admira Fusion Flow.
STEP 2
- For fillings with a thickness of over 2 mm, apply and cure in layers. Do not pull the plunger back on the syringe during or after use to guarantee the function of the non-dripping syringe.
STEP 3
- Light-curing:
Conventional polymerisation devices are suitable for light-curing the material.
The curing time is as follows when using an LED- / halogen light with a minimum light-output of 500 mW/cm²
20 s for shades A1, A2, A3, A3.5, B1, B2, C2, Incisal, BL.
Hold the light emission tip of the device as close as possible to the surface of the filling. Otherwise, the curing depth may be reduced. Incomplete curing may lead to discolouration and discomfort.
STEP 4
- Finishing:
The restoration can be finished and polished immediately after removing the matrices (e.g., fine or extra-fine diamond grinder, polisher). The tooth should be fluoridated.
Reviews
There are no reviews yet.