Waldent Maxcure 3 Light Cure Unit

Description

Light cure unit – The Product is suppose to be used in hospital and dental clinic,should be used by trained qualified dentist.This curing light is used for the principal of ray radiation to solidify the light-sensitive resin by shooting at it in a short time,is used to restore teeth

• Curing Light Mode Applications

  FULL : For general applications

  PULSE : For more gentle processing, designed for reducing the shrinkage of composite

  RAMP : First 0-5 seconds are ramped for more gentle processing,designed for patients sensitive to heat

• Environmental Factors

  Operation: 5°C — 40°C / 30% — 75% relative humidity / 70 – 106KPa atmospheric pressure
  Transportation and Storage: -20°C – +40°C /10% 93% relative humidity/70 106KPa
  atmospheric pressure.

  Depth of cure

  • F.O Light Guide : 8 mm (dia.)
  • Light Wavelength : 430 – 480nm
  • Application : General
  • Full : 1,200mW/cm2+10%for 5, 10, 15, ,20  seconds
  • Pulse : 0-1, 200mW/cm2 + 10%for  5, 10, 15, 20, seconds
  • Ramp : 1st five seconds from 0-1200mW/cm2+10% next 5, 10 , 15, 20, seconds 1200mW/cm2+10%
  • Model: MaxCure3
  • Power Input: 100-240VAC, 50Hz/60Hz
  • Power Output: 5V DC/1A
  • Wave length: 430 nm-480 nm
  • Light intensity: 0-1200mW/cm²
  • Battery: 800 mA